Sorry, you need to enable JavaScript to visit this website.

PT-RZ570U 1-Chip DLP™ Fixed Installation Laser Projector Discontinued

  • Chat with Sales
  • Contact us

PT-RZ570

Product details

Endurance Solid Shine laser projector Designed for education and corporate applications

Key features

  • Laser 1-chip DLP, 5,400 lumens (center), WUXGA
  • High brightness and excellent image quality with laser light source
  • Maintenance free up to 20000 hours with dust-resistant optical block and long lasting laser engine
  • Free 360-degree installation
  • 20,000:1 contrast ratio
  • Digital Link
  • 24/7 Operation
  • Solid Shine Laser
  • 360-Degree Free Installation
View Product Support

Chat with Sales

Specification Description
Power supply AC100 - 240V 5.9 - 2.3A 50Hz/60Hz
(Taiwan: AC110V 5.2A 60Hz)
Power consumption 500W (530VA at 240V AC) (Taiwan: 520VA at 110V AC)
NORMAL: 375W ECO: 350W SILENT: 350W SHUTTER 40W
LONG LIFE 3: 407W
*Operating Temperature: 25 °C (77 °F), Altitude: 700m (2297 ft),
ICE627087: 2008 Broadcast contents,
Picture mode: Standard, Dynamic contrast [ON]
Power consumption | Standby Mode (Eco) 0.3W, 0.2W (Taiwan)
Power consumption | Standby Mode (Normal) 3W
BTU value Max 1,706 BTU (Without light 1,638 BTU)
DLP™ chip Panel size 17.0 mm (0.67 in) diagonal (16:10 aspect ratio)
DLP™ chip Display method DLP™ chip x 1, DLP™ system
DLP™ chip Pixels 2,304,000 (1,920 x 1,200) x 1, total of 2,304,000 pixels
LENS Manual zoom/focus lenses (1.46-2.94:1), F 2.0-3.4, f 21.5-43.0 mm
Light source Laser Diode
Luminance life for set: 20,000 hours at half luminance (NORMAL/SILENT)/
24,000 hours at half luminance (Eco)
* Temperature: 35°C (95°F), Altitude 700m (2297ft), Dust: 0.15mg/m³
Screen size 1.02- 7.62 m (40- 300 inches) (16:10 aspect ratio)
Brightness 5,400 lumens (center) /5,200 lumens
Center-to-corner uniformity 90%
Contrast 20,000:1(full on/full off, dynamic contrast ON)
Resolution 1,920 x 1,200 pixels
Scanning frequency | HDMI/DVI-D fH: 15- 100kHz, fV: 24 - 120Hz, dot clock: 25 - 162 MHz
525i (480i), 625i (576i), 525p (480p), 625p (576p), 750 (720)/60p,
750 (720)/50p, 1125 (1080)/60i, 1125 (1080)/50i, 1125 (1080)/25p,
1125 (1080)/24p, 1125 (1080)/24sF, 1125 (1080)/30p, 1125 (1080)/60p,
1125 (1080)/50p, VGA (640 x 480) - WUXGA (1920 x 1200) compatible
with non-interlaced signals only
Scanning frequency | RGB fH: 15- 100kHz, fV: 24 - 120Hz, dot clock: 20 - 162 MHz
Scanning frequency | YPBPR (YCBCR) 525i (480i): fH 15.75 kHz; fV 59.94 Hz,
625i (576i): fH 15.63 kHz; fV 50 Hz,
525p (480p): fH 31.50 kHz; fV 60 Hz,
625p (576p): fH 31.25 kHz; fV 50 Hz,
750 (720)/60p: fH 45.00 kHz; fV 60 Hz,
750 (720)/50p: fH 37.50 kHz; fV 50 Hz,
1125 (1035)/60i: fH 33.75 kHz; fV 60 Hz,
1125 (1080)/60i: fH 33.75 kHz; fV 60 Hz,
1125 (1080)/50i: fH 28.13 kHz; fV 50 Hz,
1125 (1080)/25p: fH 28.13 kHz; fV 25 Hz,
1125 (1080)/24p: fH 27.00 kHz; fV 24 Hz,
1125 (1080)/24sF: fH 27.00 kHz; fV 48 Hz,
1125 (1080)/30p: fH 33.75 kHz; fV 30 Hz,
1125 (1080)/60p: fH 67.50 kHz; fV 60 Hz,
1125 (1080)/50p: fH 56.25 kHz; fV 50 Hz
Scanning frequency | Video/S-Video fH: 15.75 kHz, fV: 59.94 Hz [NTSC/NTSC4.43/PAL-M/PAL60]
fH: 15.63 kHz, fV: 50 Hz [PAL/PAL-N/SECAM]
Keystone correction range Vertical: ±40 °, Horizontal: ±20 ° (Up to a total of ±60 ° during simultaneous horizontal and vertical correction)
Optical axis shift Vertical: -44%, +64%(manual)
Horizontal: -27%, +34%(manual)
Installation Ceiling/ oor, front/rear, 360 degree free installation
Terminals | COMPUTER 1 IN D-sub HD 15-pin (female) x 1
R,G,B: 0.7 Vp-p, 75 ohms, (G: 1.0 Vp-p, 75 ohms for sync on G)
HD/VD, SYNC: TTL, high impedance, positive/negative automatic
Y, PB, PR Y: 1.0 Vp-p(including sync signal), PB/PR(CB/CR): 0.7 Vp-p, 75 ohms
Y/C Y: 1.0 Vp-p(including sync signal), C: 0.286 Vp-p, 75 ohms
Terminals | Computer 2 IN/1 OUT D-sub HD 15-pin (female) x 1
R,G,B: 0.7 Vp-p, 75 ohms, (G: 1.0 Vp-p, 75 ohms for sync on G)
HD/VD, SYNC: TTL, high impedance, positive/negative automatic
Y, PB, PR Y: 1.0 Vp-p(including sync signal), PB/PR(CB/CR): 0.7 Vp-p, 75 ohms
Terminals | DVI-D IN DVI-D 24-pin x 1, DVI 1.0 compliant, compatible with HDCP,
for single link only
Terminals | HDMI IN 1/HDMI IN 2 HDMI 19-pin x2, Deep Color, compatible with HDCP,
Audio signal: linear PCM (sampling frequencies: 48 kHz, 44.1 kHz, 32 kHz)
Terminals | VIDEO IN Pin jack x 1, 1.0 Vp-p, 75 ohms
Terminals | AUDIO IN 1 Pin jack x 2 (L-R) 0.5 Vrms, impredance: 22kilohms or more
Terminals | AUDIO IN 2/AUDIO IN 3 M3 (L-R) x 1, 0.5 Vrms, impredance: 22kilohms or more
Terminals | VARIABLE AUDIO OUT M3 x 1 (monitor out, stereo)
0-1.80 Vrms, variable, out impredance: 22kilohms or less
Terminals | SERIAL IN D-sub 9 p x 1, for external control (RS-232C compliant)
Terminals | DIGITAL LINK/LAN RJ-45 x 1, for network, DIGITAL LINK connection (HDBaseT™ compatible),
100BASE-TX, compatible with Art-Net, PJLink™ (Class 1),Deep Color, HDCP2.2
Terminals | LAN RJ-45 x 1, for network connection 10Base-T/100Base-TX,compatible with Art-Net, PJLink™
Terminals | DC OUT USB Type A x 1, for power supply (DC5 V, max 900 mA)
Power cord length 3.0 m (9 ft 10 in)
Cabinet materials Molded plastic
Dimensions (W x H x D) 498 x 168 x 492mm
(19-19/32 x 6-5/8 x 19-3/8in ) with supplied lens
Weight Approx. 16.3kg (51.1lbs)
Operating noise 28 dB (Silent), 33 dB (Normal/Eco)
Operating temperature 0 - 45 °C (32 - 113 °F)
Operating humidity 10% - 80% (no condensation)
at less than 4,200 m (13,780 ft.) above sea level
Storage Temperature -20°C - 60°C (-4 - 140 °F)
Storage Humidity 10%-80%
Technology 1-Chip DLP Laser
<sup>(1)</sup> Measurement, measuring conditions, and method of notation all comply with ISO 21118 international standards.<br/>
<sup>(2)</sup> Measured at center area of projector screen. Measurement method is in compliance with ISO/IEC 21118: 2012. Value is average of all products when shipped. May differ depending on actual unit.